Mud Flaps
Repco Petrol & Diesel Injector Cleaner
Restore lost power and boost fuel economy when adding Repco fuel injector cleaner next time, you fill up.
Protect your vehicle and others on the road with hard wearing mud flaps
Repco stock a wide range of mud flaps suited to any truck, 4wd or car you drive
Stop stone chips, paint damage or limited visibility of the vehicle behind when you fit a set or pair of mud flaps from Repco. Designed to deflect dirt, stones, mud and water onto the road from your vehicle, mud flaps are a practical and necessary addition to your vehicle. Available in a large variety of widths, sizes and materials, Repco stock mud flaps from RM Williams, Caterpillar, Snatch and more to suit your vehicle. Whether you drive a big rig, a lifted 4wd or just a grocery getter, it pays to fit mud flaps to your vehicle and limit damage to your vehicle and others.
Mud flaps perform a number of functions and are a practical accessory to fit to your vehicle. Simple patterned black rubber or urethane variants through to those iconic RM Williams mud flaps you see hanging off the back of every B&S ball ute all have a practical purpose. The larger or taller the vehicle the more important the fitment of mud flaps are. On trucks they are virtually compulsory.
Mud flaps can be fitted to both the front and rear wheels if living on a dirt or country road or you like regularly going bush. If city or freeway driving then just fitting rear mud flaps is sufficient
As the rear wheels on a vehicle rotate they throw up anything they contact on the roads surface to the rear of the vehicle. The faster the vehicle is travelling the greater the debris they throw out. This is Mud flaps reduce this stream of debris and reduce the likelyhood of it hitting the vehicle behind and help stop it hitting the rear of your vehicle. This can damage the paintwork and even dent it.
Relatively simple to install, in most case you will use existing mounting holes if your mud flaps are vehicle specific. If they are not vehicle specific you may need to attach these using self tapping screws or other mounting hardware to ensure a solid fit.