ProPlus Fender Guard Roller - FR-8094

Pro Plus Fender guard roller

Changing the stock wheel and tyre combo on your car is one of the first upgrades you can do to personalise your ride and really make it stand out from the crowd. More often than not the choice is to go for a large set of wheels in both diameter and width to really fill out those guards and give it a more aggressive stance on the road. Doing this may look great but when they scrape the bodywork over every bump or turn in the road you need to work out a solution.

This is where the Pro Plus Fender guard roller comes in to provide that additional clearance between your tyres and your bodywork to ensure correct fitment and less chance of the tyre being cut or the panel becoming distorted upon contact. Suitable for 4 and 5 wheel stud vehicles you can roll the guards on anything from your hot Japanese import, fire breathing Commodore or low slung mini truck. The trick to rolling your wheel arches is to take your time and work the roller outwards in small increments to lessen the chance of panel distortion or cracking the paint in the process. Careful and measured application of a heat gun to soften the paint may be necessary but once again take your time and be sure to not blister or scorch the paint in the process. Useful for not just rolling your lips but for the ability to pump the guards by around 10 to 12mm this guard roller is a necessity to keep all that fat rubber tucked safely under the wheel arches and out of harms way.

Stocking not just guard rollers, but heat guns, coil & leaf springs and shocks and struts we have all the right parts to get those new set of rims sitting properly on your car to give you that maximum impact. Shop online or come in store today and check out the right solutions for your vehicle.