Skip to content Skip to navigation menu
Repco Bringin' The Bathurst Promotion - Retail Social Promotion

Davies Craig Electric Water Pump - EWP130 Alloy &amp, LCD Controller Combo 24V - 8991

SKU: A5553081


Save to Wish List
Check that it fits your vehicle. Select your Vehicle
  • The Davies, Craig 8991 EWP130 Combo includes the following components:
  • EWP130 Alloy 24V Pump x1
  • EWP/Fan LCD Controller x1
  • Alloy elbow adaptor - 35mm x1
  • Alloy straight adaptor - 35mm x1
  • Hose clamps x4
  • Rubber adaptor sleeve - 3mm x4
  • EWP Adaptor O-Ring x2
  • Wiring Harness Digital Controller x1
  • Inline Adaptor 5/16" x1
  • EWP130 Combo Hardware Bag x1
  • Fitting Instructions
^ Show More Show Less

The Davies, Craig EWP130 Alloy 24V Combo Kit is designed for universal engine fitment, to satisfy those larger and higher horsepower, turbocharged, supercharged and ‘worked’ engines which develop excessive heat. The EWP130 Alloy 24V unit has AN-16 internal inlet and outlet threads for neat, tight, screw-in fitting applications. The EWP130 configuration mirrors the highly successful EWP80 which offers a numerous selection of attachment options, including elbow and straight adaptors which can be bolted on to both the inlet and outlet for simple remote engine mounting.

The EWP130 will be supplied with one each of the new 35mm straight and elbow alloy adaptors, ‘O’ rings and mounting hardware along with two 3mm rubber adaptor sleeves. The respective 38 mm alloy adaptors and 6mm rubber adaptor sleeves are optional.

This rugged alloy hi-flow electric water pump is designed to complement or replace the engine’s existing mechanical water pump. This essential performance accessory increases power to your vehicle’s drive wheels and improves coolant temperature control. The EWP130 is a universal, DIY, easy installation fitment to engines up to seven litres. By removing the parasitic power losses of belt-driven water pumps, the EWP130 releases up to 10kW (13hp) of extra power, increased torque and fuel savings. Combine it with the LCD EWP/Fan Digital Controller and the pump continues to run after you’ve switched off, eliminating “heat soak” and extending engine life. The EWP130 and LCD EWP/Fan Digital Controller Combo Kit is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine. The Davies, Craig EWP Header Adaptor Kit can replace the mechanical water pump completely.

EWP INSTALLATION OPTIONS:

  • Installing an EWP as an AUXILIARY PUMP
  • Disabling Mechanical water pump
  • Disengaged mechanical water pump (recommended)
  • Removed mechanical water pump (ideal)

In most cases EWP will be adequately supported by the radiator hose. Where mounting is required, the EWP must be soft mounted to protect against vibration. For the EWP115, EWP130 and EWP150 Part #8700 Mounting bracket is recommended.

EWP & FAN DIGITAL CONTROLLER - 12 & 24 VOLT

The EWP & Fan Digital Controller (Part #8002) is Australian designed and as part Davies, Craig's continuous improvement program this advanced Digital Controller boasts a suite of enhancements. The updated Digital Controller now has two specific functions. This unique Controller will now manage the operation of the EWP by varying the speed of the EWP in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures: Singular degrees from 40°C to 110°C .

The LCD Digital Controller will now operate the engine’s electric fan automatically once the engine has reached +3°C above the target temperature. A significant benefit too is the Controller allows the EWP to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.

Features:

  • Black & White Numerical Screen
  • Celsius or Fahrenheit display option
  • Warning Alarms:
  • - Plus 10°C (14°F) set/target temperature
  • - Under temp 40°C after 5 mins
  • - Temp sensor error
  • - Over or under voltage
  • - EWP error
  • Select any set temp range from 40°C to 110°C
  • Set / targeted temperature memory
  • Override feature to assist bleeding EWP & fail safe
  • Input voltage display
  • Compatible with billeted style Electric Water Pumps

Access exclusive offers

Join Our Ignition Member Loyalty Program To Access Exclusive Offers.

Select Your Nearest Store

For delivery options and stock availability
Click & Collect
Click & Collect
Ready in 15 mins*
Same Day Delivery
Same Day Delivery
Within 5kms*
Buy Now Pay Later
Buy Now Pay Later
Flexible Options*
Join Repco Ignition
Join Repco Ignition
$4.95 Delivery*