Penrite 100,000km Green Concentrate Corrosion Inhibitor 500ml - COOL10005

Penrite Radiator Corrosion Inhibitor Concentrate 500ml

Penrite Radiator Corrosion Inhibitor Concentrate is a Type 'B', radiator corrosion inhibitor that protects against cavitation, scaling and oxidisation in vehicles that do not require a Type '' Anti-Freeze Anti-Boil coolant. It is an effective engine coolant that uses a Hybrid Organic Acid Technology (HOAT) inhibitor to provide maximum protection against corrosion whilst providing superior heat transfer to reduce engine operating temperature.

Penrite Radiator Corrosion Inhibitor is suitable for use in a wide range of vehicles including passenger cars, light commercials vehicles, motorcycles, trucks, buses, stationary engines and other equipment.

Penrite Radiator Corrosion Inhibitor when mixed with water will help provide improved heat transfer abilities over straight water by reducing cavitation and eliminating hot spots inside the engine. This can help lower the running temperature of the engine, preventing damage from overheating whilst the inhibitor pack will prevent rust, corrosion, scaling and oxidation if maintained at the correct dosage.

DOSAGE:

• Radiator Corrosion Inhibitor should be used at a ratio of 50ml per litre of water.
• Penrite recommend mixing with Penrite De-Mineralised Water
• 1 litre makes up to 20 litres of coolant.

Repco's extensive range of leading brand radiator stop leaks and cooling system flushes will give you the solutions you need to ensure your vehicles radiator and cooling system remain cool and trouble free.

As with many vital components in your vehicle the cooling system and radiator require more than just ensuring the coolant levels are topped up at each service. Coolants over time break down and lose their effectiveness as with any fluid that your vehicle requires. When this happens your vehicle many suffer from overheating and this in turn may lead to damage of internal parts such as water pumps or in the event of coolant loss more significant issues such as blown head gaskets.

By using a quality coolant flush and running this through your vehicle every 3-5 years you will ensure the dirt and rust build up is removed and will allow your new coolant to keep your car cool and your internal components free from corrosion. Alternatively if you have cooling system issues and you coolant levels drop over time this may require a radiator stop leak additive to repair this. These additives work by running through your coolant system and reacting with exposure to air which in turn forms a seal to block the coolant loss.

At Repco we have the radiator additive solutions to ensure you remain on the road and with a store near you we can help get you sorted sooner. Browse online or shop in store to choose the right product for your car and at a price to suit any budget.