Penrite Blue OEM Approved Coolant Premix 1L - COOLBLUEPMX001

Penrite OEM Approved Blue Coolant Premix - Warranty approved coolant as used in factory applications

Penrite Blue OEM Approved Coolant Concentrate is a GENUINE GLYSANTIN G30 Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved, Type 'A' Ethylene glycol, Anti-Freeze Anti-Boil as used in initial manufacturer factory coolant fills. This blue coolant uses a technically advanced OAT (Organic Acid Technology) based inhibitor system that is Silicate, Phosphate, Amine, Borate and Nitrite free. The extended long-life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the coolingsystem for 8 years or 500,000km.

Penrite Blue OEM Coolant Premix is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel and industrial engines where an OAT type anti-freeze / anti-boil and anti-corrosion properties are required. Penrite Blue OEM Coolant Premix Coolant is suitable for passenger cars, 4WD's, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment. It is suitable for use with Australian, European, Asian & US vehicles It is Silicate, Borate and Phosphate Free making it particularly suitable for both European & Japanese vehicles that use blue coloured coolant such as Nissan, Subaru & Suzuki.

Penrite Blue OEM Coolant Premix provides long-term protection against rust and corrosion for all materials used in the engine and in the cooling system. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics. It is particularly effective in all cast aluminium engines that are under load or used in extreme hot and cold climates.

Penrite Blue OEM Coolant Premix may be used in all types of vehicles that use blue coloured initial fill coolants and it is also suitable for use in out of warranty service to maintain OEM performance. It is also ideal for motorcycles.

Penrite Blue OEM Coolant Premix is a 50% concentration formulation and is ready to use directly from the container. It is pre-mixed with Penrite De-Mineralised Water and can be poured directly into the cooling system. No further dilution is required. It can be used as a complete service refill, top up or is safe to mix with compatible type A coolant. Penrite recommend that a 50% concentration level should be maintained for maximum, performance and longevity of the coolant and protection of the cooling system.

Not sure what oil, coolant or additive is right for your car? Try Rego Search and add your vehicle to your garage and we'll show you the best Penrite lubricants to suit your vehicle.