Penrite OEM Approved Red Coolant Premix 5L - COOLREDPMX005

Penrite OEM Approved Red Coolant Premix - Warranty approved red coolant as used in factory applications

Penrite Red OEM Approved Coolant is a GENUINE GLYSANTIN G40 Original Equipment Manufacturer (OEM), Type 'A' Ethylene glycol, Anti-Freeze Anti-Boil as used in initial manufacturer factory fills. It uses a technically advanced OAT (Organic Acid Technology) based inhibitor system that is Phosphate, Amine, Borate and Nitrite free. The extended long-life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the cooling system for 8 years or 500,000km.

Penrite OEM Red Coolant Concentrate is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel engines that require full Si-OAT type A anti-freeze / anti-boil / anti-corrosion properties. Penrite Red Coolant Concentrate is suitable for cars, 4WD's, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment. It is especially suited to vehicles of European origin such as Audi, Bentley, Bugatti, Lamborghini, VW, Seat and Skoda (all 2008 on), MAN trucks (Dec 2011 on), Mercedes-Benz trucks (Oct 2011 on) and Porsche (911, Boxster, Cayman, Cayenne, Panamera) 1997 onwards.

Penrite Red OEM Coolant Concentrateprovides extended long-term protection against rust and corrosion for all materials used in the engine and in the cooling system. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics. It is especially effective in all aluminium engines that are under load or used in extreme hot and cold climates. It may be used in all types of vehicles that use red, magenta or orange coloured initial fill coolants and it is also suitable for use in out of warranty service to maintain OEM performance. It is also ideal for motorcycles.

Red OEM Coolant Premix is a 50% concentration formulation and is ready to use directly from the container. It is pre-mixed with Penrite De-Mineralised Water and can be poured directly into the cooling system. No further dilution is required. It can be used as a complete service refill, top up or is safe to mix with compatible type A coolant. Penrite recommend that a 50% concentration level should be maintained for maximum, performance and longevity of the coolant and protection of the cooling system.

Not sure what oil, coolant or additive is right for your car? Try Rego Search and add your vehicle to your garage and we'll show you the best Penrite lubricants to suit your vehicle.